With the do-it-yourselfer in mind, SKIL Power Tools launches the 7302 Octo Multi-Finishing Sander

[Read the rest of this article...]

Industrial Nanotech, Inc., an emerging global leader in nanoscience energy saving solutions, announced today that their patented Nansulate Translucent PT thermal insulation and asset protection coating has been chosen for an oil refinery project to provide thermal insulation and corrosion protection of an oil pipeline at Galp Energia's Porto Refinery

[Read the rest of this article...]

Reichhold, Inc. announced a reorganization to its distribution network adding Archway Sales, Inc., as its new authorized distributor for Reichhold coating resins in the Southeastern United States, which includes Florida, Georgia, North Carolina, South Carolina and Alabama.

[Read the rest of this article...]

M. Rincón Ortíz, M. A. Rodríguez, and R. M. Carranza et al.
Ni-Cr-Mo alloys are highly resistant to general and localized corrosion, but they may suffer crevice corrosion in aggressive environmental conditions, such as high-chloride concentrations, applied potentials, and temperatures. It is assumed that localized corrosion will only occur when the corrosio ... [Corrosion 66, 105002 (2010)] published Fri Oct 01, 2010.

[Read the rest of this article...]

Abstract not available. [Corrosion 66, 109001 (2010)] published Fri Oct 01, 2010.

[Read the rest of this article...]

X. Shan and J. H. Payer
One important factor affecting crevice corrosion of passive metals is the crevice geometry, e.g., the gap of the crevice. The crevice geometry can be affected by the properties of the materials used as the crevice formers, i.e., a polymeric crevice former can conform to the surface roughness of a m ... [Corrosion 66, 105005 (2010)] published Fri Oct 01, 2010.

[Read the rest of this article...]

S. -W. Kim, H. -P. Kim, and J. -U. Jeong et al.
The present article is concerned with the effect of a residual stress induced by a dissimilar metal welding on stress corrosion cracking (SCC) of an Alloy 600 (UNS N06600) bottom-mounted instrumentation nozzle as a penetration mock-up in a pressurized water reactor. From a finite element analysis ( ... [Corrosion 66, 106001 (2010)] published Fri Oct 01, 2010.

[Read the rest of this article...]

M. Rajc̆ić-Vujasinović, S. Nestorović, and V. Grekulović et al.
The CuAg4at% alloy exhibits the anneal-hardening effect, which has been seen in previous investigations in both cast and sintered CuAg4at% alloys. The goal of this work was to study corrosion properties of the cast alloy in different stages of its synthesis and thermomechanical treatment. The elect ... [Corrosion 66, 105004 (2010)] published Fri Oct 01, 2010.

[Read the rest of this article...]

D. G. Enos
The current level of understanding of the atmospheric environmental degradation of gold-plated copper with and without a nickel underplate (and related materials) has limited the effectiveness of mathematical models aimed at predicting device lifetime/reliability. Efforts to understand this phenome ... [Corrosion 66, 105003 (2010)] published Fri Oct 01, 2010.

[Read the rest of this article...]

Y. Wang and K. J. KarisAllen
Physical scale modeling (PSM) is an experimental technology that has been used to evaluate and design shipboard impressed current cathodic protection (ICCP) systems by various researchers and designers. PSM is also a preferred tool for validating ICCP numerical modeling results, owing to the well-c ... [Corrosion 66, 105001 (2010)] published Fri Oct 01, 2010.

[Read the rest of this article...]