Articles

News Articles

01
J. Konys, W. Krauss, and N. Holstein et al.
In the helium-cooled lead-lithium (HCLL) design concept for blanket structures of a future fusion power plant, the eutectic Pb-15.7Li alloy is used as a liquid tritium breeder and is in direct contact with the structural material, e.g., ferritic-martensitic steels. Compatibility tests showed that ... [Corrosion 67, 026002 (2011)] published Tue Feb 01, 2011.

[Read the rest of this article...]

Posted in: Corrosion
Actions: E-mail | Permalink |
01
A. Pardo, M. C. Merino, and R. Arrabal et al.
The corrosion behavior of AZ31, AZ80, and AZ91D Mg-Al-Zn alloys coated with aluminum and Al-11Si thermal spray was evaluated in 3.5 wt% sodium chloride (NaCl) solution at 22°C by gravimetric and electrochemical impedance spectroscopy (EIS) measurements. The corrosion products were examined using s ... [Corrosion 67, 025003 (2011)] published Tue Feb 01, 2011.

[Read the rest of this article...]

Posted in: Corrosion
Actions: E-mail | Permalink |
01
S. Gadve, A. Mukherjee, and S. N. Malhotra et al.
Large numbers of reinforced concrete (RC) structures that have been damaged from corrosion of steel reinforcements are rehabilitated with fiber-reinforced polymer (FRP) composites. This paper investigates active protection of the steel embedded in concrete that is treated with surface-bonded carbo ... [Corrosion 67, 025002 (2011)] published Tue Feb 01, 2011.

[Read the rest of this article...]

Posted in: Corrosion
Actions: E-mail | Permalink |
01
H. Soyama
The corrosion potential of pressure vessel steel after exposure to residual bubbles and the open-circuit potential of Pt during cavitation were measured to investigate the corrosion behavior induced by residual bubbles after cavitation bubble collapse (as distinct from erosion caused by cavitation ... [Corrosion 67, 025001 (2011)] published Tue Feb 01, 2011.

[Read the rest of this article...]

Posted in: Corrosion
Actions: E-mail | Permalink |
01
D. Han, Y. Jiang, and B. Deng et al.
A simple and rapid electrochemical method for the evaluation of crevice corrosion in duplex stainless steels (DSS) is described. Three types of DSS—namely, UNS S32101, UNS S31803, and UNS S32750—were tested in 1 mol/L sodium chloride (NaCl) solutions. Results showed good reproducibility with a typ ... [Corrosion 67, 025004 (2011)] published Tue Feb 01, 2011.

[Read the rest of this article...]

Posted in: Corrosion
Actions: E-mail | Permalink |
31
Facilities looking for a faster, greener and less invasive way to coat their concrete floors have a more robust product solution available than ever before, thanks to UV-curable materials leader DSM

[Read the rest of this article...]

Posted in: Surface Finishing
Actions: E-mail | Permalink |
31
Scientists can now manufacture a synthetic version of the self-healing sticky substance that mussels use to anchor themselves to rocks in pounding ocean surf and surging tidal basins

[Read the rest of this article...]

Posted in: Surface Finishing
Actions: E-mail | Permalink |
26
Russia's largest paint maker will focus on its core decorative operations.

[Read the rest of this article...]

Posted in: Industry News
Actions: E-mail | Permalink |
26
New JV will focus on non-decorative operations.

[Read the rest of this article...]

Posted in: Industry News
Actions: E-mail | Permalink |
26
Sells 49 percent stake to focus on environmentally friendly products.

[Read the rest of this article...]

Posted in: Industry News
Actions: E-mail | Permalink |
Page 495 of 531First   Previous   490  491  492  493  494  [495]  496  497  498  499  Next   Last