S. Ju, Y. Zhang, and D. Shang et al.
The corrosion rates of two nickel-based alloys, Alloy 400 (UNS N04400) and Alloy C-276 (UNS N10276), and two stainless steels, Type 316L (UNS 31603) and Type 304 (UNS S30400), in a concentrated sodium hydroxide (NaOH) solution (45 mass%) containing sodium chloride (NaCl, 15 g/L) between 180°C to 2 ... [Corrosion 67, 036001 (2011)] published Tue Mar 01, 2011.

[Read the rest of this article...]

E. Blasco-Tamarit, D. M. García-García, and M. Ibáñez Ferrándiz et al.
Open-circuit potential tests and potentiodynamic anodic polarization curves have been carried out to obtain information about the electrochemical behavior of a highly alloyed austenitic stainless steel (UNS N08031) used as base metal (BM), heat-affected zone (HAZ) region, and weld metal (WM). The ... [Corrosion 67, 035001 (2011)] published Tue Mar 01, 2011.

[Read the rest of this article...]

C. M. Menendez, J. M. Bojes, and J. Lerbscher et al.
Batch corrosion inhibitors are used widely for the corrosion control of production wells and pipelines in the oil and gas industry. Rules of thumb that incorporate film thickness, contact time, and surface area are still commonly used to calculate the volume of batch inhibitor required for pipelin ... [Corrosion 67, 035003 (2011)] published Tue Mar 01, 2011.

[Read the rest of this article...]

B. Maier and G. S. Frankel
The pitting corrosion behavior of Type 304 (UNS S30400) stainless steel (SS) under an electrolyte droplet with a layer of silica particles on the surface was investigated using a Kelvin probe. Droplets of 2.5 M magnesium chloride (MgCl2) solution were placed on an electrophoretically silica-coated ... [Corrosion 67, 035004 (2011)] published Tue Mar 01, 2011.

[Read the rest of this article...]

H. Kim, D. B. Mitton, and R. M. Latanision et al.
Stress corrosion cracking (SCC) of Alloy 625 (UNS N06625) has been investigated in pH 2 aqueous solution at high temperatures (300°C to 426°C) and high pressure (24.1 MPa) to understand the corrosion behavior in supercritical water oxidation (SCWO) systems, which can destroy aqueous organic wastes ... [Corrosion 67, 035002 (2011)] published Tue Mar 01, 2011.

[Read the rest of this article...]

ArriveNEWS, the industrial trade show magazine & organizer of IITS 2011, an online manufacturing expo announced a new type of protective coatings on the International Paint & Coatings Marketplace at http://www.industrialsaver.com/classifieds/index.php?cat=12 Elijah Robinson, spokesman for ArriveNEWS.com, a division of Industrial Leaders, said over 25 exhibitors of paints and various coatings have been added to its online industrial trade show specializing in oil based, interior & exterior, metal finishing, enamel, conformal powder, industrial floor, polyurethane, ceramic, rubber, acrylic, protective, woodworking, roof, high temperature, barrier and other types of paint and coating products

[Read the rest of this article...]

Profile Technologies, Inc. (the "Company" or "Profile"), the developer of proprietary long range electromagnetic pipeline corrosion inspection technologies, is pleased to announce a key regulatory development and that its long-time chief executive, Henry Gemino, is retiring, but will remain in office during a transition period until the Company hires a replacement CEO

[Read the rest of this article...]

New drugs generate new challenges in the field of pharmaceutical packaging. "Biomolecules, for instance, are being used today in over 50 percent of all product developments in pharmaceutical therapy," says Dr. Claudia Dietrich, Product Manager Vials & Coating at SCHOTT in St. Gallen, Switzerland, speaking at "Pharmapack" in Paris, France

[Read the rest of this article...]

European powder coatings companies are experiencing difficulty in maintaining full supply.

[Read the rest of this article...]

Moves polyurethane systems production for subsea insulation to Gulf Coast

[Read the rest of this article...]